ampco safety tools ampco s 1144 tin shears 3 x 12 is Sold Out see related products

mySimon is not affiliated with or endorsed by Simon Property Group. If you are looking for Simon Property Group, click here.

The ampco safety tools ampco s 1144 tin shears 3 x 12 is sold out or discontinued. We found 1500 related products.

Set includes: 1/2" drive Ratchet, Extension Bar, Sliding Bar for Extension, Hinged Handle Wrench, 22 sockets sizes 10mm through 32mm, and molded carrying case. For use in locations where flammable or combustible vapors, liquids, dusts or residues are present and near sensitive magnetic equipment.

$1578 Go to
Amazon Marketplace

Ampco 18 Bronze Bar I have been stockpiling metal for years and I have way too much material so, I've got to get rid of some. Dimensions: 1.6" Square x 7" long Length: +/- 1/8" Condition: Surface blemishes from handling and oxidation from sitting in storage. Ampco 18 Alloy Info Aluminium (Al) 10.5% Iron (Fe) 3.5% Others max. 0.5% Copper (Cu) balance AMPCO® 18 is ideally suited where high strength and hardness combined with wear and fatigue resistance are required. Some of the more common applications of this alloy are bushings, bearings, gears, worm wheels, valve seats and guides, hydraulic valve parts, pump rods, guide pin bushings, gibs and slides, etc. It is an excellent bearing material characterized by good resistance to wear and fatigue. Ampco 18 Bronze Bar Identification Label found on some of the bronze bars being sold in this auction Identification labels found on some of the round bronze bars bought in the same lot.

Combination Wrench Set, Non-sparking, Non-magnetic, Number Of Pieces 7, Metric, Number Of Points 12, Head Angle 15 Deg., Wrenches Included 8, 10, 12, 14, 17, 19, 22mm, Range Of Lengths 5 5/16 To 11 5/8 In., Roll-up Pouch, Aluminum Bronze Finish, Meets/exceeds Fm Approved

$454 Go to
Grainger

Non-sparking Non-magnetic Corrosion resistant Made in the USA Most tools beryllium-free Head Weight = 1 3/4 lb Handle Type = Straight Overall Length = 14 in Handle Material = Fiberglass Type = Sledge Hammer Factory Mutual Approved MANUFACTURER: Ampco Safety Tools Weight: 2.35 lb(s) Case Pack: Each

Ampco safety tools SEPTLS065D50 Non-sparking. Non-magnetic. Corrosion resistant. Made in the USA. Beryllium-free.

$119 Go to
Shoplet.com

OAV1332 Features: Non-sparking Non-magnetic Corrosion resistant Made in the USA Beryllium-free Blade Tip Shape: Square Point Handle Material: Fiberglass Price is for 1 Each Testing and approvals: Factory Mutual Approved Dimensions: Blade Length: 11 in Blade Width: 9 in

$238 Go to
Walmart

Combination Wrench Set, Non-sparking, Non-magnetic, Number Of Pieces 7, Sae, Number Of Points 12, Head Angle 15 Deg, Wrenches Included 3/8, 7/16, 1/2, 9/16, 5/8, 3/4, & 7/8 In, Range Of Lengths 6 5/16 To 13 1/4 In, Roll-up Pouch, Meets/exceeds U.s. Government Requirements For Non-magnetic Hand Tools Defined By Mil-i-17214, Factory Mutual Approved For Use In Hazardous Environments

$432 Go to
Grainger

You are bidding on a new K20 NI-CU non-sparking metal scraper by Ampco. The blade is a copper color and is non-magnetic. It has a wooden handle with brass rivets. This item is new, unused, and made in the USA. I am not a dealer for this item and there is no warranty expressed or implied, except that it is as described. The only acceptable reason for returns is if the item is not as described. Shipping to the lower 48 is free for this item. I can combine multiple purchases if you notify me by em

Fiberglass handles are easier to clean, 10 times stronger than wooden handles, eliminate failures caused by exposure to environmental elements and control vibration. Tools are for use in locations where flammable or combustible vapors, liquids, dusts or residues are present.

$244 Go to
Amazon Marketplace

Ampco 1 1/4" Brass Non Sparking Combination Wrench W674 New Old Stock- Dirty and has a few scuffs from storage For urgent questions please call 816-985-2717. Leave voicemail if unanswered. SHIPPING USPS Priority Mail within the Continental U.S.A. NOTE: SHIPPING TO HI, AK, PR, GU WILL COST EXTRA. Please email for exact shipping. Items are shipped within 72 hours of purchase, EXCEPT WEEKENDS HOLIDAYS If there is ANY problem with the item or your purchase, PLEASE CONTACT ME using the 'Ask a questi

OAV1330 Features: Non-sparking Non-magnetic Corrosion resistant Made in the USA Beryllium-free Blade Tip Shape: Round Point Handle Material: Fiberglass Price is for 1 Each Testing and approvals: Factory Mutual Approved Dimensions: Blade Length: 11 1/4 in Blade Width: 9 in

$213 Go to
Walmart

Striking Box End Wrench, Non-sparking, Non-magnetic, Straight Handle, Sae, Number Of Points 6, Size 1 7/16 In, Overall Length 7 1/2 In, Aluminum Bronze Construction, Meets/exceeds U.s. Government Requirements For Non-magnetic Hand Tools Defined By Mil-i-17214, Factory Mutual Approved For Use In Hazardous Environments

$122 Go to
Grainger

UP FOR AUCTION IS A NEW SET OF 2, AMPCO 6 POINT BOX STRIKING WRENCH, SIZES 1-1/4" AND 1-5/8". PLEASE VISIT WWW.AMPCOSAFETYTOOLS.COM FOR MORE INFORMATION. PART NUMBERS ARE WS1808 AND WS1810. ITEM SOLD AS IS! NO NEGATIVE OR 0 FEEDBACK BIDDERS! PAYPAL ONLY! NO SHIPPING OUT OF THE US NOR LOCAL PICK UP! THANKS AND ENJOY!

$100 Go to
eBay

Fiberglass handles are easier to clean, 10 times stronger than wooden handles, eliminate failures caused by exposure to environmental elements and control vibration. Tools are for use in locations where flammable or combustible vapors, liquids, dusts or residues are present.

$258 Go to
Amazon Marketplace

6 Point Standard Socket, Non Sparking, Nonmagnetic, Metric, Drive Size 1/2", Number Of Points 6, Size 19mm, Aluminum Bronze Construction, Meets/exceeds U.s. Government Requirements For Non-magnetic Hand Tools Defined By Mil-i-17214, Factory Mutual Approved For Use In Hazardous Environments

$43 Go to
Grainger

DETAILS: Non-sparking Non-magnetic Corrosion resistant Made in the USA Most tools beryllium-free Opening Size = 1 1/8 in [Max]Opening Type = Jaw Head Angle = 15 Hook Hook Overall Length = 8 in Handle Type = I-Beam Jaw Packing Type = Adjustable Wrench Wt. = 0.44 lb Factory Mutual Approved MANUFACTURER: Ampco Safety Tools Weight: 0.44 lb(s)Case Pack: Each Please note that item pictured may not be 100% representative of what is received. Image provided is sometimes a stock photo provided by the ma

Fiberglass handles are easier to clean, 10 times stronger than wooden handles, eliminate failures caused by exposure to environmental elements and control vibration. Tools are for use in locations where flammable or combustible vapors, liquids, dusts or residues are present.

$109 Go to
Amazon Marketplace

6 Point Standard Socket, Non Sparking, Nonmagnetic, Sae, Drive Size 1/2", Number Of Points 6, Size 3/4", Aluminum Bronze Construction, Meets/exceeds U.s. Government Requirements For Non-magnetic Hand Tools Defined By Mil-i-17214, Factory Mutual Approved For Use In Hazardous Environments

$49 Go to
Grainger

6 Point Standard Socket, Non Sparking, Nonmagnetic, Sae, Drive Size 1/2", Number Of Points 6, Size 3/8", Aluminum Bronze Construction, Meets/exceeds U.s. Government Requirements For Non-magnetic Hand Tools Defined By Mil-i-17214, Factory Mutual Approved For Use In Hazardous Environments

$39 Go to
Grainger

Kit includes: Standard Screwdriver 9/32" tip w/3" blade, 6-1/2" Combination Pliers, 8" Adjustable Wrench and 9" Crate Opener. For use in locations where flammable or combustible vapors, liquids, dusts or residues are present and near sensitive magnetic equipment.

$194 Go to
Amazon Marketplace

Fiberglass handles are easier to clean, 10 times stronger than wooden handles, eliminate failures caused by exposure to environmental elements and control vibration. Tools are for use in locations where flammable or combustible vapors, liquids, dusts or residues are present.

$226 Go to
Amazon Marketplace

Ampco adjustable wrench Model # W-74, 15"; Grainger item # 2RNU7 Adjustable Wrench, Nonsparking, Nonmagnetic, Jaw Capacity 1 11/16, Overall Length 15 In., Aluminum Bronze Construction, Plain Grip Handle, Meets/Exceeds FM Approved Unused, one minor ding on handle ( see picture)Buyer pays shipping Accept Paypal or MO

$190 Go to
eBay

DETAILS: Non-sparking Non-magnetic Corrosion resistant Made in the USA Most tools beryllium-free Opening Size = 1 5/16 in [Max]Opening Type = Jaw Head Angle = 15 Hook Hook Overall Length = 10 in Handle Type = I-Beam Jaw Packing Type = Adjustable Wrench Wt. = 0.69 lb Factory Mutual Approved MANUFACTURER: Ampco Safety Tools Weight: 0.81 lb(s)Case Pack: Each Please note that item pictured may not be 100% representative of what is received. Image provided is sometimes a stock photo provided by the

Ampco non-sparking tin snips Model # S-1144; Grainger item # 4RPP4 Tin Snips, Nonsparking, Nonmagnetic, Number of Pieces 1, Regular Cutting Action, Cutting Length 3 In, Overall Length 12 In, Aluminum Bronze Never used Buyer pays shipping Accept Paypal or MO

6 Point Standard Socket, Non Sparking, Nonmagnetic, Metric, Drive Size 1/2", Number Of Points 6, Size 10mm, Aluminum Bronze Construction, Meets/exceeds U.s. Government Requirements For Non-magnetic Hand Tools Defined By Mil-i-17214, Factory Mutual Approved For Use In Hazardous Environments

$39 Go to
Grainger