mySimon is not affiliated with or endorsed by Simon Property Group. If you are looking for Simon Property Group, click here.

Showing results 1 - 25 of 73 for "2hp 1725RPM 145TC TEFC C Face W/Base 115/230V Leeson 120274"

LEESON Pressure Washer Duty Electric Motor -3/4 HP, 115/208-230V, 1725 RPM, TEFC, Rigid Base, Model 110022
LEESON Pressure Washer Duty Electric Motor -3/4 HP, 115/208-230V, 1725 RPM, TEFC, Rigid Base, Model 110022
The single phase 3/4 HP LEESON Pressure Washer Duty Electric Motor provides owners with a strong and durable motor that can be applied in hot or cold pressure washer applications. These motors are used where minimum starting and running amperages are required. Capacitor Start Yes, CSA Yes, Frame Type 56, Amps 5.4, Capacitor Run Yes, Motor Phases 1, Reversible Yes, Hertz 60, HP 3/4, Manual Overload Protection Yes, Shank Length in. 2 1/8, Totally Enclosed Housing Yes, UL Yes, Rigid Base Yes, Rotation Direction Selective CCW, Shank Diameter in. 5/8, Volts 115/208-230, Rated RPM 1,725. Double shielded ball bearings are pre-lubricated with a special formulation for moisture resistance and provides extra long life Allows operating temps ranging from -20F to +350F Extra heavy varnish to provide additional protection High efficiency, energy saving designs Low vibration operation due to dynamically balanced rotor High efficiency, reduced amperage energy-saving design High temperature copper magnet wire for high overload capacity Manual reset overloads protect against motor overload and automatic resets Reversible rotation direction adds versatility Continuous duty operation Service factor of 1.15 Rigid base allows for mounting on equipment Totally enclosed, fan cooled TEFC housing has an external fan to provide cooling by blowing air over the outside frame. Model Number: 110022
$370 Go to
Northern Tool
LEESON Pressure Washer Duty Electric Motor -2 HP, 115/208-230V, 1800 RPM, TEFC, C-Face with Base, Model 121465
LEESON Pressure Washer Duty Electric Motor -2 HP, 115/208-230V, 1800 RPM, TEFC, C-Face with Base, Model 121465
The single phase 2 HP LEESON Pressure Washer Duty Electric Motor is specially suited for use in hot or cold pressure washer applications and other single phase installations requiring minimum starting and running amperages. UL listed and CSA approved. CSA Yes, Frame Type 145TC, Hertz 60, Auto Overload Protection No, Capacitor Run Yes, Capacitor Start Yes, Open Drip Proof Housing No, Resilient Base No, HP 2, Manual Overload Protection Yes, Motor Phases 1, Shank Diameter in. 7/8, Totally Enclosed Housing Yes, Reversible Yes, Rigid Base Yes, Rotation Direction Reversible, UL Yes, Volts 115/208-230, Amps 9.2, Rated RPM 1,800, Shank Length in. 2.375. Double-shielded ball bearings are pre-lubricated with a special formulation for moisture resistance to provide extra long life Allows for operating temperatures ranging from -20F to +350F Extra-heavy varnish on winding to provide additional protection High efficiency, reduced amperage energy-saving design Dynamically balanced rotor for low vibration operation High temperature copper magnet wire for high overload capacity Manual reset overload protects against motor overload and automatic resets Reversible rotation direction adds versatility Continuous duty operation Service factor of 1.0 C-Face with base mounting allows for direct mounting to a gearbox or other direct coupled equipment Totally enclosed, fan-cooled TEFC housing has an external fan to provide cooling by blowing air over the outside frame. Model Number: 121465
$700 Go to
Northern Tool
LEESON Pressure Washer Duty Electric Motor -2 HP, 115/208-230V, 3600 RPM, TEFC, C-Face with Base, Model 114995
LEESON Pressure Washer Duty Electric Motor -2 HP, 115/208-230V, 3600 RPM, TEFC, C-Face with Base, Model 114995
The single phase 2 HP LEESON Pressure Washer Duty Electric Motor is specially suited for use in hot or cold pressure washer applications and other single phase installations requiring minimum starting and running amperages. UL listed and CSA approved. Auto Overload Protection No, Capacitor Run Yes, Capacitor Start Yes, HP 2, Manual Overload Protection Yes, Motor Phases 1, CSA Yes, Frame Type 56HC, Hertz 60, Reversible Yes, Rigid Base Yes, Rotation Direction Reversible, Open Drip Proof Housing No, Resilient Base No, UL Yes, Volts 115/208-230, Shank Diameter in. 5/8, Shank Length in. 2, Totally Enclosed Housing Yes, Amps 9.2, Rated RPM 3,600. Double-shielded ball bearings are pre-lubricated with a special formulation for moisture resistance to provide extra long life Allows for operating temperatures ranging from -20F to +350F Extra-heavy varnish on winding to provide additional protection High efficiency, reduced amperage energy-saving design Dynamically balanced rotor for low vibration operation High temperature copper magnet wire for high overload capacity Manual reset overload protects against motor overload and automatic resets Reversible rotation direction adds versatility Continuous duty operation High service factor of 1.15 Capacitor start/capacitor run construction for reduced amperage and higher efficiency C-Face with base mounting allows for direct mounting to a gearbox or other direct coupled equipment Totally enclosed, fan-cooled TEFC housing has an external fan to provide cooling by blowing air over the outside frame. Model Number: 114995
$530 Go to
Northern Tool
LEESON Pressure Washer Duty Electric Motor -1 HP, 115/208-230V, 1800 RPM, TEFC, C-Face with Base, Model 115879
LEESON Pressure Washer Duty Electric Motor -1 HP, 115/208-230V, 1800 RPM, TEFC, C-Face with Base, Model 115879
The single phase 1 HP LEESON Pressure Washer Duty Electric Motor is specially suited for use in hot or cold pressure washer applications and other single phase installations requiring minimum starting and running amperages. UL listed and CSA approved. Auto Overload Protection No, Capacitor Run No, Capacitor Start Yes, Amps 6.4, HP 1, Manual Overload Protection Yes, Motor Phases 1, CSA Yes, Frame Type 56C, Hertz 60, Reversible Yes, Rigid Base Yes, Rotation Direction Reversible, Open Drip Proof Housing No, Resilient Base No, UL Yes, Volts 115/208-230, Shank Diameter in. 5/8, Shank Length in. 2, Totally Enclosed Housing Yes, Rated RPM 1,800. Double-shielded ball bearings are pre-lubricated with a special formulation for moisture resistance to provide extra long life Allows for operating temperatures ranging from -20F to +350F Extra-heavy varnish on winding to provide additional protection High efficiency, reduced amperage energy-saving design Dynamically balanced rotor for low vibration operation High temperature copper magnet wire for high overload capacity Manual reset overload protects against motor overload and automatic resets Reversible rotation direction adds versatility Continuous duty operation C-Face with base mounting allows for direct mounting to a gearbox or other direct coupled equipment Totally enclosed, fan-cooled TEFC housing has an external fan to provide cooling by blowing air over the outside frame. Model Number: 115879
$435 Go to
Northern Tool
LEESON Pressure Washer Duty Electric Motor -1/2 HP, 115/208-230V, 1800 RPM, TEFC, C-Face with Base, Model 116486
LEESON Pressure Washer Duty Electric Motor -1/2 HP, 115/208-230V, 1800 RPM, TEFC, C-Face with Base, Model 116486
The single phase 1/2 HP LEESON Pressure Washer Duty Electric Motor is specially suited for use in hot or cold pressure washer applications and other single phase installations requiring minimum starting and running amperages. UL listed and CSA approved. Auto Overload Protection No, Capacitor Run Yes, Capacitor Start Yes, HP 1/2, Manual Overload Protection Yes, Motor Phases 1, CSA Yes, Frame Type 56C, Hertz 60, Reversible Yes, Rigid Base Yes, Rotation Direction Reversible, Open Drip Proof Housing No, Resilient Base No, UL Yes, Volts 115/208-230, Shank Diameter in. 5/8, Shank Length in. 2, Totally Enclosed Housing Yes, Amps 4.4, Rated RPM 1,800. Double-shielded ball bearings are pre-lubricated with a special formulation for moisture resistance to provide extra long life Allows for operating temperatures ranging from -20F to +350F Extra-heavy varnish on winding to provide additional protection High efficiency, reduced amperage energy-saving design Dynamically balanced rotor for low vibration operation High temperature copper magnet wire for high overload capacity Manual reset overload protects against motor overload and automatic resets Reversible rotation direction adds versatility Continuous duty operation High service factor of 1.15 C-Face with base mounting allows for direct mounting to a gearbox or other direct coupled equipment Totally enclosed, fan-cooled TEFC housing has an external fan to provide cooling by blowing air over the outside frame Farm duty performance. Model Number: 116486
$440 Go to
Northern Tool