The MMS Series Inverter/Charger is a pure sine wave inverter providing a cost effective solution for those with smaller power needs in mobile applications. Versatile, easy-to-use, and lightweight, the MMS Series provides a reliable base for your energy system. Power Factor Corrected (PFC) Charger is built into all of our inverter/chargers. It uses less energy from a generator than a standard charger - using 25-30% less AC current. Safe and reliable: The MMS Series is ETL Listed to the stringent requirements of UL/cUL 458 and CSA C22.2 #107.1-01 for mobile use. The modern, hourglass case, paired with the die cast aluminum base combines form with function, creating an attractive unit that uses its base as a heat sink for superior high temperature operation. Features The standard 20 amp transfer relay will pass AC power through the inverter when using shore or generator power. Low/high battery protection: If your battery voltage reaches below 10 VDC or 17 VDC, the MMS Series will automatically shut down. Mount the MMS Series on a shelf, bulkhead, or even upside down. Fan cooled: The MMS Series is fan cooled, enabling the unit to work well in confined spaces. If the inverter does exceed its temperature limits, it will automatically shut down and then restart when it cools down. Current overload protection: The MMS Series will automatically shut down if its output wattage is exceeded or it detects a short in the wiring, saving the unit from costly damage. The MMS Series comes with an on/off front-mounted switch with an easy-to-read LED indicator. This model comes with built in input and output circuit breakers for ease of installation. The standard battery temp sensor monitors temperatures from 0 - 50° C. Dimensions (inches) 16.6 x 8.4 x 4.7. The MMS Series is backed by a two-year (24-month) parts and labor warranty. MMS1012-G - New model with GFCI outlet and 3 ft cord. Ideal for emergency vehicle applications.

Blizzard Magnum 8.7 Power Full Suspension skis 2012The 18.5 meter turn radius says it all. A single layer of Titanal and Blizzard's Front Rocker profile keep you moving smoothly from edge to edge, delivering power and agility at a high rate of speed. IQ Max technology provides the support needed, by providing excellent energy transmission from the binding directly into the sidewall and edge.MAG8712. Suggested retail price: $950.00 Technical Information: Sidecut:128-87-113 Radius:18.5m @174cm Technology: Power Full Suspension IQ-MAX Sidewall Powerframe Titanal Front Rocker

RFX75 Powerband EKL RFX75 10 meter final replacement Product Description The RFX75 is an RF final output stage and low pass filter designed as a replacement and/or upgrade for most 10 meter amateur transceivers.The RFX75 features the latest power mosfet technology and built in S-meter detection circuit. The output power of the RFX75 varies depending on the transceiver it is installed on. Most installations will see 75-100 watts PEP output power.Compatible with these radios and more Cobra 25 Cob

Blizzard Magnum 8.7 Power Full Suspension skis 2012The 18.5 meter turn radius says it all. A single layer of Titanal and Blizzard's Front Rocker profile keep you moving smoothly from edge to edge, delivering power and agility at a high rate of speed. IQ Max technology provides the support needed, by providing excellent energy transmission from the binding directly into the sidewall and edge.MAG8712. Suggested retail price: $950.00 Technical Information: Sidecut:128-87-113 Radius:18.5m @174cm Technology: Power Full Suspension IQ-MAX Sidewall Powerframe Titanal Front Rocker

Green LED Channel and Frequency Counter Displays Large Round Meter with Blue(RX) and Red(TX) Backlight Variable Dimmer - Controls All Front Panel Lighting Double-BarrelTM Microphone Jacks - Another Magnum Exclusive! The S-680 Features TWO 4-Pin Microphone Jacks - In Parallel! One on the Front Panel and the other on the Right Side Run Two Different Microphones, or Give a Mic to Your Co-Pilot! Variable Power Output Control - Operates in ALL Modes TURBOTM Digital Echo with Dual Controls AMT - All Mode Talkback with Volume Control on Front Panel TOP GUNTM Modulator - A Magnum Exclusive! Turns the S-680's transmitter section into a modulator With 1 watt carrier - swing to 75 watts! 100% modulation for unbelievable power Modulator On/Off Control on Front Panel TOP GUNTM Compressor - A Magnum Exclusive! Compressor Improves Transmitted Audio Helps Punch Through Crowded Airwaves Front Panel Band Switch High SWR Warning Light with On/Off Control Roger Beep with On/Off Control +10kHz Switch Microphone and RF Gain Noise Blanker / ANL FREE Schematic and Parts Layout Diagrams 1 Year Warranty with Extended Warranties Available

USA STOCKED AND SHIPPED NEW Heavy Duty replacement Power cord Replacement Icom and Magnum Power Cord 12 gauge power cord for Icom, Magnum Delta Force, and Magnum Alpha Force radios. Dimensions: 15 (Length) Includes: 2 X 10 Amp Fuse

Magnum Power Punch Aide- PUNCH BUNCH-Magnum Power Punch Aide. Use this lightweight and stable tool to help you punch with precision and ease. Perfect for crafters with diminished hand strength or who just want an easier way to punch. Use it with Punch Bunch Mini Punches up to Mega Giant Size punches (not included). The Magnum features a durable construction with aluminum arm and solid 8x8 inch acrylic table. This package contains one Magnum Power Punch Aide. Total measurements: 4x8x8 inches. Punches not included.

2005-2008 Dodge Magnum Power Stop Brake Rotors. Power Stop Cross Drilled and Slotted Rotors Features - Order with confidence! AutoAnything is an authorized Power Stop dealer. With us you get the genuine factory product, plus full manufacturer warranty & support. Equip your car, truck or SUV with the Power Stop Cross Drilled and Slotted Rotors and say goodbye to excessive heat, poor wet weather performance and dangerous brake fade. Power Stop custom-designs their Cross Drilled and Slotted Rotors on CAD-driven super computers for a perfect fit on your year, make and model. Your Power Stop Cross Drilled and Slotted Rotors use both holes and slots to deliver optimal heat dissipation and out-gassing. The cross drilled holes on your Power Stop Cross Drilled and Slotted Rotors maximize airflow across the disc's surface for greatly reduced temperatures. Power Stop Cross Drilled and Slotted Rotors. For the top selection of Dodge Magnum 2005-2008 Power Stop Brakes & Brake Pads shop online today. The Power Stop Cross Drilled and Slotted Rotors will improve and personalize your vehicle. Dodge Brake Rotors by Power Stop - selected by many auto enthusiasts in the top automotive discussion forums. Power Stop Cross Drilled and Slotted Rotors for your 08 Dodge Magnum will deliver the results you are looking for! Power Stop Cross Drilled and Slotted Rotors - 2005-2008 Dodge Magnum - Brakes & Brake Pads - Brake Rotors.

RC Car & Truck Ceramic Lightning Econo Bearing kits are specially designed for on-road or relatively clean driving environments. These ABEC #1 bearings have stainless steel races, retainers and shields with ceramic balls. Ceramic hybrids are lighter, have less rolling resistance and can sustain higher operating temperatures than traditional bearings. All Ceramic Lightning Econo bearings are packed in grease and will require a short break in period to loosen up.

Electro Harmonix 44 Magnum In-Line 44-Watt Power Amp The new 44 Magnum guitar amp head provides 44 watts of clean and natural power but can also deliver a true amplifier overdrive at the turn of a knob. From your pocket to the stage, the 44 Magnum is the perfect gigging and practice solution. Despite being described as a guitar head the 44 has the character and control to work with any electric instrument. Flip the brightness switch for a more defined top end. The sweet tone of our legendary 22 Caliber but with an extra power edge that can make a difference. 44 watts of power into 8 or 16 ohms Tone switch toggles between a neutral, flat setting and a Musical top end boost Maximum headroom potential Can be driven to a natural, true amplifier saturation Fits in the palm of your hand Comes with a 24DC-3000 power supply

The Oakton 35418-10 pH 610 meter is a handheld, waterproof and dustproof meter that measures pH and mV, and comes with a probe. A meter is commonly used to measure the pH and mV of substance. This meter features ATC, with pH calibration up to six points, at most used values for a wide range of results. It has up to 15 buffer options with auto-buffer recognition of USA, National Institute of Standards and Technology (NIST), Deutsches Institut für Normung (DIN) and PWB standards, for ease of use. It has a large, backlit, multi-line LCD screen with electrode status indicator and calibration data for ease of viewing. The meter has a built-in, real-time clock, and adjustable, set-point alarms to remind you when calibration is due. It stores up to 500 data sets, with Good Laboratory Practices (GLP) date and time stamping, and has IrDA wireless technology for data communication. It has dual power-up for choice of batteries with field use, or optional AC power adapter for lab use. The meter has password protection for security, and is Ingress Protection (IP) 67-rated (even with no probe attached), for protection against solid objects or liquids. The 35418-10 pH 610 meter has manual or Automatic Temperature Compensation from 0 to 100 degrees C, and works in an ambient operating temperature of 0 to 50 degrees C (32 to 122 degrees F). It can be calibrated at six buffer values, with selection of four sets: USA 1.68, 4.01, 7.01, 10.01, 12.45; NIST 1.68, 4.01, 6.86, 9.18, 12.45; DIN 1.09, 2.06, 4.65, 6.79, 9.23, 12.75, or custom buffers. mV calibration is offset up to + or - 150, temperature offset 0.1 degree C (0.1 degree F) increments. pH range -2.000 to 19.999, resolution 0.1/0.01/0.001, accuracy of + or - 0.002. Its mV range is + or - 2000, resolution 0.10 and accuracy of + or - 0.2. Temperature range is -10.00 to 110.0 degrees C (14.0 to 230.0 degrees F), selectable, resolution 0.1 degree C (0.1 degree F), accuracy + or - 0.5 degrees C (+ or - 0.9 degrees F). The meter is 7.25(l) x 3.25(w) x 2.25(h) inches, and weighs 1.0 lb (0.45 kg). It comes with an all-in-one, pH/temperature probe that has an epoxy-body for impact-resistance and durability, and a single-junction for general-purpose application. It works with four 1.5V AA batteries (not included) for up to 500 hours of continuous use, or universal AC adapter (not included). pH testers measure the acidity or alkalinity of a substance and are commonly used by researchers, manufacturers, and hobbyists in aquaculture, agriculture, hydroponics, wine-making, and water-testing, and for scientific applications. Conductivity is the ability of a solution or material to conduct an electrical current. Oakton Instruments manufactures an array of scientific instruments for research, industrial, and educational uses. Since 1991, Oakton has distributed a wide variety of instruments such as meters, electrodes, and transmitters. Oakton is based in Vernon Hills, IL, and has facilities in Europe, Asia, and China. What’s in the Box? Meter 35418-10 Probe 35816-71

UP FOR SALE IS THIS HO SCALE ~FRATESCHI ~ READING RAILROAD FA1 POWERED ENGINE #305 ~ ITEM #1012 ~ NEW IN BOX ~SEE PHOTOS FOR DETAILS ~ NICE ITEM FOR COLLECTOR ~ Check out my other items !add me to your favorites list ! SHIPPING/HANDLING STATED SHIPPING/HANDLING CHARGES ARE FOR 48 CONTINENTEL UNITED STATES ONLY.***~~ NO INTERNATIONAL SHIPPING~~*** QUESTIONS SEND ALL MESSAGES ABOUT E-BAY ITEMS THOUGH E-BAY MESSAGES.WE ANSWER ALL MESSAGES SEND THOUGH E-BAY MESSAGES.IF YOU DO NOT GET ANSWER PLEASE

Powered by Frooition Pro Shop Search On-Stage Stands SSB-6500 Speaker Stand Bag Click here to view full size. Full Size Image Click to close full size. Item Description This heavy duty On-Stage Stands SSB-6500 is a padded speaker stand bag with ample room for either 2 speaker stands, 6 microphone stands or a load of drum hardware. This speaker stand bag features an adjustable shoulder strap with metal clip for fast removal. Also includes hand straps for convenient handling. 2 heavy gauge metal

The DE-500 is a high-performance handheld LCR meter that is full-featured yet cost effective. It rivals the capabilities and options of many of its bench counterparts. This handheld LCR meter can transfer data to a PC via a standard, fully isolated, optical IR-USB interface. It also features a Sorting mode, allowing users to quickly sort components. The DE-5000 handheld LCR Meter has automatic impedance selection. This allows the user to measure the L/C/R components in Auto LCR mode without having to select the type of measurement. To accommodate various test requirements, the DE-5000 handheld LCR Meter offers selectable test frequencies: 100 Hz / 120 Hz / 1 kHz / 10 kHz / 100 kHz. The LCR Meter is powered by a standard 9V battery. For additional convenience, it may also use an optional ac adapter (DE-5000-AC). To transfer data to a PC, the LCR Meter comes with a built-in IR interface. IET offers an optional Data Transfer Kit (DE-5000-DTK). This kit includes: IR-USB interface adapter, a USB cable, and a CD with software for the PC. Click Here to download the software associated with the USB Data Kit and Product Manual. Unzip the folder and follow the instructions to install. DE-5000 Handheld LCR Meter Basic Specifications Parameters measured: Ls / Lp / Cs / Cp / Rs / Rp / DCR with D/Q/?/ESR measurement Automatic L-C-R selection Accuracy: As good as 0.3% See datasheet for more info Selectable test model: Series or Parallel Display: Backlit 20,000/2,000 LCR Metercount Input connection: Accepts normal or shrouded banana plugs 2-Wire plus separate Guard Automated LCR ranges: L: 20.000 ?H -- 2000 H C: 200.00 pF -- 20.00 mF R: 20.000 ? -- 200.0 M? DCR: 200.00 ? -- 200.0 M? Selectable test frequencies: 100 Hz / 120 Hz / 1 kHz / 10 kHz / 100 kHz Measurement rate: 1.2/second nominal Available tolerances for sorting function: ±0.25% ±5% ±0.5% ±10% ±1% ±20% ±2% -20/+80% Response time: Approx. 1 second/DUT

Magnum Energy MMS1012 12V Pure Sine Wave Inverter 50ADC Magnum Energy 1500 Watt 24V Pure Sine Wave Inverter with 50A Charger - MMS1012 The MMS Series Inverter/Charger is a pure sine wave inverter providing a cost effective solution for those with smaller power needs in mobile applications. Versatile, easy-to-use, and lightweight, the MMS Series provides a reliable base for your energy system. The MMS Series inverter is designed to accommodate entertainment systems and small appliances in smaller RV's and boats in an all new design. Based on the popular ME and MS Series inverters, the MMS is smaller, lighter and less expensive while retaining all the built in protection and reliability of ME and MS models. The MMS charger uses a PFC (Power Factor Corrected) charger, which is 85% efficient and the same charger topology used in all Magnum models The MMS Series is ETL Listed to the stringent requirements of UL/cUL 458 and CSA C22.2 #107.1-01 for mobile use. Our PFC charger is built into all of our inverter charge

This 800 watt system includes 2-10" MTX Magnum subs, a perfectly matched MTX Magnum mono block amplifier, and a MTX Magnum dual 10" sub box enclosure. These two high powered 10" subs come loaded and pre-wired (at 4 ohms) in the heavy duty trapezoid enclosure which saves you from having to spend an additional $80 building your own box. The 800 watt high powered mono block amp is perfectly matched to this enclosure and has both high and low level inputs with a built in crossover and bass boost. With the variable crossover and bass boost options, this subwoofer/amplifier package lets you customize the bass response to your vehicle. It also has 3-way Protection circuitry (Short/Thermal/Overload) which makes this amplifier virtually impossible to blow.