mySimon is not affiliated with or endorsed by Simon Property Group. If you are looking for Simon Property Group, click here.

ie8 fix

Showing results 1 - 25 of 159 for "Orvis Swarovision El 10x50 and 12x50"

ATV Cover : 95 x 50 x 48 Black
ATV Cover : 95 x 50 x 48 Black
Your ATV was built to take quite a beating. Hills, dirt, mud, creeks, river beds, sand and puddles are no match. However, rust, tree sap and increased exposure to the sun are your ATV's "kryptonite" and can ravage your beloved rugged transport. Using a cover such as our CoverMates ATV Cover can protect your ATV from the harsh elements threatening it when it's not in use to keep it running longer; and looking better too.The CoverMates ATV cover superior protection begins with our durable, rich black, 300D polyester material. Chemically treated to repel water, the material is as functional as it is attractive. Flap-covered vents at the rear of the ATV cover allow for proper air flow circulation to aid in the evaporation of moisture to decrease the chances of rust, mold and mildew development. All the seams have been turned in to eliminate raw edges and stitched tight with our interlocking double-stitch method; which helps to prevent moisture from seeping through the seams. We are so confident in the performance and quality of protection from our covers that we back every CoverMates ATV cover with our 3 year manufacturer's warranty.What good is a cover, though, if it can't stay on, right? Our Covermates ATV cover comes with an extra strong, thick elastic band hemmed into the bottom of the cover to strongly "hug" the ATV and fight against be blown off by the wind. Additionally, we have also included two (2) adjustable straps that run under the ATV and snap together to keep your ATV cover firmly in place, no matter the weather. We've even included 2 reinforced loops at the front and back of the ATV cover to connect an additional rope or bungee cord to for that little bit of extra reassurance. Lock up your ATV without a problem as well. Reinforced grommets toward the bottom of our CoverMates ATV cover are designed to accommodate a cable lock and/or chains in order to secure your ATV without disrupting the performance of the cover. Order your CoverMatesATV cover today and do your part to keep protect your ATV for years to come.
$90 Go to
The Cover Store
Isolate It!: Sorbothane Vibration Damping Sheet Stock 50 Duro (1/10 x 12 x 12in)
Isolate It!: Sorbothane Vibration Damping Sheet Stock 50 Duro (1/10 x 12 x 12in)
Isolate It! Sorbothane vibration isolator sheets are versatile anti-vibration pads that can be used as feet, stops, spacers and protectors in many different applications. The unique Sorbothane ultra-soft urethane is a durable, resilient, polymer that provides outstanding vibration isolation and non-skid properties. Sorbothane isolators help absorb impact and noise and have excellent resistance to aging; they will not harden or crack over time. They feature a smooth, clean, black urethane surface. Use them on any audio and electronic equipment to prevent skipping and interference. More is not better. A large lightly loaded sheet will have a high spring rate and will not deflect enough to provide good isolation. Over compression will lead to short service life. The proper compression range is 3 to 20 per cent depending on the "Shape Factor." Shape factor is the ratio of contact surface (one side) divided by perimeter area. Geometry matters. Small circular pieces and rings "bulge" better than squares and rectangles. "Bulgeability" makes for better isolation. Use many small discs rather than a few large rectangles for best vibration isolation performance. Thickness matters. The thicker the sheet the lower the natural frequency. You need a sheet at least one-inch thick to get your natural frequency down to 10 Hertz. (10 Hertz is your target natural frequency for a 900 RPM motor.) Use the natural tackiness of Sorbothane or apply adhesives to glue the Sorbothane to metal plates on both sides or consider a custom design with molded-in stud mounts. This sheet is perfect for cutting to meet the needs of special applications or can be used whole.Caution: This product contains plasticizer which may cause minor discoloration to wood, plastic, composite and other materials following prolonged contact.
$19 Go to
Amazon Marketplace
Scooter Cover : 72 x 36 x 50 Black
Scooter Cover : 72 x 36 x 50 Black
For some people, scooters are a great thing. They save gas, allow you to navigate through traffic congestion and make it easier to park closer to your destination than you usually can with a full-sized vehicle. Unfortunately, however, your exposed scooter does not have much protection against the elements as its larger counterparts do. That is where The Cover Store steps in to level the playing field with our CoverMates Scooter Cover.Made of our rich, black, 300D polyester material our CoverMates scooter covers stylishly keep your scooter out of weather's harmful way. It's more than just a beautiful face though; the polyester material has been chemically treated to repel water to keep your scooter dry. The bottom of the scooter cover has been hemmed with an extra thick, sturdy elastic band to ensure a tighter, more custom fit. Additionally, two (2) adjustable buckled straps connect underneath the scooter to ensure your cover stays on, no matter how hard the wind blows. Still not sure it will stay on despite the strong elastic band and straps? Fine, we've included 2 loops in the front and back of the cover for you to tie a cord or bungee underneath the scooter for that last extra bit of reassurance. And if you are like most other responsible scooter owners, you probably like to keep your scooter locked up with a cable lock when not in use. We thought of that too, and even included reinforced grommets on each side of the scooter cover to feed your cable lock through without disrupting the coverage of our CoverMates scooter cover.Like most things in life, though, it's the little things that often make a big difference. Our CoverMates scooter covers come with a heat retardant layer of material sewn into the rear of the cover to help avoid burning a hole into the cover. We've also sewn a label into the rear of the cover to help you determine which direction is the front or back when putting the cover on. Flap-covered vents have even been sewn near the front at the handle bars to allow for proper air circulation as to help prevent the development of mold and mildew. Every CoverMates scooter cover is sewn with a heavy-duty double stitching and no raw edges to prevent tearing and leaking at the seams. Our scooter covers even come with our 3 year manufacturer's warranty against workmanship and defect. Sure there are other scooter covers out there, but none of them come close to the quality, workmanship and overall value of a CoverMates scooter cover.
$60 Go to
The Cover Store
Ridley X-Fire - Rival Build Bike Black, 50 Rival
Ridley X-Fire - Rival Build Bike Black, 50 Rival
With five cyclocross world championships and an incredible number of national titles to its credit, Belgian brand Ridley can be rightly said to be residing at the center of the cyclocross universe. The Ridley X-Fire/SRAM Rival Complete Bike is part of its stable of winning cyclocross bikes; Ridley has been working hand-in-hand with world champions for over a decade, and their requests for innovations have created the unique features that propel the X-Fire ahead of the competition and onto the podium. The Ridley X-Fire/SRAM Rival Complete Bike features a frame constructed of 24-ton carbon fiber, and a full carbon 4ZA Oryx fork. This combination gives the X-Fire just the right amount of stiffness to enable quick acceleration and pickup for dig-in-slippery climbs, but not so much as to break your body apart when you bunny-hop the barrier. Ridley's field experience has also bred a few frame designs that you'll be happy to have when you're running in the mud. For one, the X-Fire has a squared down tube that's more comfortable to put on a shoulder or in a hand on in the runs, and it in turn stiffens the bottom bracket juncture for direct crank efficiency. For protection from the elements and those times when you're running with the bike, Ridley incorporated internal cable routing for the shift cables and the rear brake line. The Oryx fork uses a massive 1-1/8 by 1-1/2in fork crown that eliminates brake chatter and increases lateral rigidity. Ridley even designed the fork shape to shed excess dirt.If you can think of it, Ridley has already done it. The X-Fire is the culmination of a long list of firsts from Ridley; the first full carbon cyclocross frame, the first over-sized carbon cross fork, and the first 1-1/8 by 1-1/2in cyclocross head tube.
$1995 Go to
RealCyclist.com
ATV Cover : 95 x 50 x 48 Black
ATV Cover : 95 x 50 x 48 Black
Your ATV was built to take quite a beating. Hills, dirt, mud, creeks, river beds, sand and puddles are no match. However, rust, tree sap and increased exposure to the sun are your ATV's "kryptonite" and can ravage your beloved rugged transport. Using a cover such as our CoverMates ATV Cover can protect your ATV from the harsh elements threatening it when it's not in use to keep it running longer; and looking better too.The CoverMates ATV cover superior protection begins with our durable, rich black, 300D polyester material. Chemically treated to repel water, the material is as functional as it is attractive. Flap-covered vents at the rear of the ATV cover allow for proper air flow circulation to aid in the evaporation of moisture to decrease the chances of rust, mold and mildew development. All the seams have been turned in to eliminate raw edges and stitched tight with our interlocking double-stitch method; which helps to prevent moisture from seeping through the seams. We are so confident in the performance and quality of protection from our covers that we back every CoverMates ATV cover with our 3 year manufacturer's warranty.What good is a cover, though, if it can't stay on, right? Our Covermates ATV cover comes with an extra strong, thick elastic band hemmed into the bottom of the cover to strongly "hug" the ATV and fight against be blown off by the wind. Additionally, we have also included two (2) adjustable straps that run under the ATV and snap together to keep your ATV cover firmly in place, no matter the weather. We've even included 2 reinforced loops at the front and back of the ATV cover to connect an additional rope or bungee cord to for that little bit of extra reassurance. Lock up your ATV without a problem as well. Reinforced grommets toward the bottom of our CoverMates ATV cover are designed to accommodate a cable lock and/or chains in order to secure your ATV without disrupting the performance of t
$90 Go to
Amazon Marketplace