This is a brand new Grade 1 panic bar from Tell Manufacturing. It is complete with all mounting hardware. It is non-handed - meaning that it will work on either right or left handed doors. UL Listed Please see spec sheet below. This is a model 8300B-3AL. Great price !! We also offer panic bars with vertical rods and commercial grade door closers and door levers as well - see our other auctions. This panic bar has an aluminum finish - we also have them in stainless steel too - see our other list

Designed for standard width stile applications on wood and metal doors Functions: 10 - No outside Operation (No Cylinder) ET Control is used as Pull Only and 63 - Key outside Unlocks/Locks Trim UL Fire and Panic listed Concealed single point guarded latching for additional security Single door applications Door Types: Wood or metal 1-3/4(44mm) Thick Door 4-1/2 (114mm) minimum stile Door Widths: F Rail - 33 to 36 (84cm to 91cm) No cutting required for 36 door. G Rail - 43 to 48 (110cm to 122cm) No cutting required for 48 door Strike: C908 Standard Black Nylon Coated - ANSI Prep A115.1 Dogging Feature: Hex key dogging standard; Cylinder dogging available (16-) Electric Options: AL-alarm, 55-Request-to-exit signal- rail monitoring, 56-ELR remote latch retraction Mounting Fasteners: Supplied standard with wood and machine screws Latch Bolt: Brass Nickel Plated, 3/4 (19mm) throw, anti-friction Dead Latch: Brass, sliding type Device Centerline from Fini

Available option on all 80 Series Exit Devices (except FM8700) Retrofit kit available for existing devices Motor-driven latch retraction Continuous or intermittent use Adjustable timer (0-10 seconds) no costly external timer required Diagnostic LED to improve field service .6A during retraction and .25A maintained in dogged hold position Available for panic and fire exit hardware Compatible with Latchbolt Monitoring, Rail Signal Switch, Electroluminescent Rail, Hex Key and Cylinder Dogging Kit includes: Motor Bracket Assy, Motor Controller & Fasteners Finishes: Bright Brass, Clear Coated (BHMA 605), Satin Brass, Clear Coated (BHMA 606), Satin Bronze, Clear Coated (BHMA 612), Dark Oxidized Satin Bronze, Oil Rubbed (BHMA 613) and Satin Stainless Steel (BHMA 630) The 56- Push Retrofit Kits can only be added to 80 Series* Exit Device manufactured after 1995

Available option on all 80 Series Exit Devices (except FM8700) Retrofit kit available for existing devices Motor-driven latch retraction Continuous or intermittent use Adjustable timer (0-10 seconds) no costly external timer required Diagnostic LED to improve field service .6A during retraction and .25A maintained in dogged hold position Available for panic and fire exit hardware Compatible with Latchbolt Monitoring, Rail Signal Switch, Electroluminescent Rail, Hex Key and Cylinder Dogging Kit includes: Motor Bracket Assy, Motor Controller & Fasteners Finishes: Bright Brass, Clear Coated (BHMA 605), Satin Brass, Clear Coated (BHMA 606), Satin Bronze, Clear Coated (BHMA 612), Dark Oxidized Satin Bronze, Oil Rubbed (BHMA 613), Bright Stainless Steel (BHMA 629) and Satin Stainless Steel (BHMA 630) The 56- Push Retrofit Kits can only be added to 80 Series* Exit Device manufactured after 1995

Available option on all 80 Series Exit Devices (except FM8700) Retrofit kit available for existing devices Motor-driven latch retraction Continuous or intermittent use Adjustable timer (0-10 seconds) no costly external timer required Diagnostic LED to improve field service .6A during retraction and .25A maintained in dogged hold position Available for panic and fire exit hardware Compatible with Latchbolt Monitoring, Rail Signal Switch, Electroluminescent Rail, Hex Key and Cylinder Dogging Kit includes: Motor Bracket Assy, Motor Controller & Fasteners Finishes: Bright Brass, Clear Coated (BHMA 605), Satin Brass, Satin Bronze, Clear Coated (BHMA 612), Dark Oxidized Satin Bronze, Oil Rubbed (BHMA 613) and Satin Stainless Steel (BHMA 630) The 56- Push Retrofit Kits can only be added to 80 Series* Exit Device manufactured after 1995

NEW IN BOX Sargent 8800 Series Door Exit Devices with lever handle Commerical Heavy Duty - Instuctions included with templates RIGHT HANDED These retail for OVER $1800.If you buy more than one please wait for invoice. I combine for least expensive shipping.Email with questions Thank you!Note: UPS has insurance included USPS will need/has signature confirmation only.Insurance optional on USPS Posted with eBay Mobile

Two point latching (top and bottom of door) Functions: 10 - No outside Operation (No Cylinder), 13 - Key outside Unlocks/Locks Trim; #41 Cylinder supplied and 63 - Key outside Unlocks/Locks Trim. UL Fire and Panic listed Top & bottom latchbolt projection adjustable through center case Standard bottom latch compatible with latch track thresholds (by others) Single and double door applications Rods are 1/2 (13mm) brass, bronze or stainless steel Door Types: Wood or metal 1-3/4(44mm) Thick Door Door Widths: F Rail - 33 to 36 (84cm to 91cm) No cutting required for 36 door. G Rail - 43 to 48 (110cm to 122cm) No cutting required for 48 door Strike: 649 Top Strike (Panic and Fire Rated) Optional Strikes: 624 Bottom Strike; 655 Fire Rated Bottom Strike Dogging Feature: Hex key dogging standard; Cylinder dogging available (16-) Electric Options: AL-alarm, 55-Request-to-exit signal-rail monitoring, 56-ELR remote latch retraction Mounting Fasteners: Supplied st

NEW IN BOX Sargent 8800 Series Door Exit Devices with lever handle Commerical Heavy Duty - Instuctions included with templates LEFT HANDED These retail for OVER $1800.If you buy more than one please wait for invoice. I combine for least expensive shipping.Email with questions Thank you!Note: UPS shipping has insurance included USPS will only have/need signature confirmation (insurance optional)

55-M56 Kit: Request to Exit Signal Switch is integrated into the connecting arm within the rail Available option on all 80 Series Exit Devices (except FM8700) Retrofit kit available for existing devices Motor-driven latch retraction Continuous or intermittent use Adjustable timer (0-10 seconds) no costly external timer required Diagnostic LED to improve field service .6A during retraction and .25A maintained in dogged hold position Available for panic and fire exit hardware Compatible with Latchbolt Monitoring, Rail Signal Switch, Electroluminescent Rail, Hex Key and Cylinder Dogging Kit includes: Motor Bracket Assy, Motor Controller & Fasteners Finishes: Dark Oxidized Satin Bronze, Oil Rubbed (BHMA 613) and Satin Stainless Steel (BHMA 630) The 56- Push Retrofit Kits can only be added to 80 Series* Exit Device manufactured after 1995

Designed for standard width stile applications on wood and metal doors Concealed single point guarded latching for additional security Single door applications Door Types: Wood or metal 1-3/4(44mm) Thick Door 4-1/2 (114mm) minimum stile Strike: C908 Standard Black Nylon Coated - ANSI Prep A115.1 Mounting Fasteners: Supplied standard with wood and machine screws Latch Bolt: Brass Nickel Plated, 3/4 (19mm) throw, anti-friction Dead Latch: Brass, sliding type Device Centerline from Finished Floor: 41 (1041 mm) for standard applications Center Case Dimensions: 8-3/8 (213mm) x 2-5/8 (67mm) Projection: Pushbar Neutral 3 (76 mm); Pushbar Depressed 2-1/8 (54 mm) Finishes: Dark Oxidized Satin Bronze, Oil Rubbed (BHMA 613) and Satin Stainless Steel (BHMA 630) 56- Electric Latch Retraction Features Field serviceable -modular design Motor driven latch retraction for smooth, precise operation Amount of rail retraction is automatically controlled by the 56- circuitry; System actively monitors its position and adjusts itself Adjustable retraction timer (0-10 seconds; factory setting is 5 seconds) Standard electric hinge - no special power transfer required Can be used for continuous and intermittent use Power Requirements: 24VDC regulated/filtered power supply (3500 Series) Current draw: 700mA during retraction & 75mA maintained in dogged position Minimum Door Widths: - Wide Stile Door 28 - Narrow Stile Door 28

Designed for standard width stile applications on wood and metal doors Concealed single point guarded latching for additional security Single door applications Door Types: Wood or metal 1-3/4(44mm) Thick Door 4-1/2 (114mm) minimum stile Strike: C908 Standard Black Nylon Coated - ANSI Prep A115.1 Mounting Fasteners: Supplied standard with wood and machine screws Latch Bolt: Brass Nickel Plated, 3/4 (19mm) throw, anti-friction Dead Latch: Brass, sliding type Device Centerline from Finished Floor: 41 (1041 mm) for standard applications Center Case Dimensions: 8-3/8 (213mm) x 2-5/8 (67mm) Projection: Pushbar Neutral 3 (76 mm); Pushbar Depressed 2-1/8 (54 mm) Finishes: Dark Oxidized Satin Bronze, Oil Rubbed (BHMA 613) and Satin Stainless Steel (BHMA 630) 56- Electric Latch Retraction Features Field serviceable -modular design Motor driven latch retraction for smooth, precise operation Amount of rail retraction is automatically controlled by the 56- circuitry; System actively monitors its position and adjusts itself Adjustable retraction timer (0-10 seconds; factory setting is 5 seconds) Standard electric hinge - no special power transfer required Can be used for continuous and intermittent use Power Requirements: 24VDC regulated/filtered power supply (3500 Series) Current draw: 700mA during retraction & 75mA maintained in dogged position Minimum Door Widths: - Wide Stile Door 28 - Narrow Stile Door 28

Thanks for Looking! Check my other listings and bookmark my ebay store, I have HUNDREDS of interesting items and add more all the time! You are bidding on a used Sargent Mortise Alarm Exit Door Push Device. This Device is in great condition aside from some minor sctrating on the interior of the locking mechanism. when fully assembled the scratches are not visible.Size: Fits 24 - 32 Doors (if door is smaller than 32, rail may need to be trimed)Boxes: Model #: 5804 E Finish: US32D ***See photo

Designed for standard width stile applications on wood and metal doors Concealed single point guarded latching for additional security Single door applications Door Types: Wood or metal 1-3/4(44mm) Thick Door 4-1/2 (114mm) minimum stile Strike: C908 Standard Black Nylon Coated - ANSI Prep A115.1 Dogging Feature: Hex key dogging standard; Cylinder dogging available (16-) Mounting Fasteners: Supplied standard with wood and machine screws Latch Bolt: Brass Nickel Plated, 3/4 (19mm) throw, anti-friction Dead Latch: Brass, sliding type Device Centerline from Finished Floor: 41 (1041 mm) for standard applications Center Case Dimensions: 8-3/8 (213mm) x 2-5/8 (67mm) Projection: Pushbar Neutral 3 (76 mm); Pushbar Depressed 2-1/8 (54 mm) Finishes: Dark Oxidized Satin Bronze, Oil Rubbed (BHMA 613) and Satin Stainless Steel (BHMA 630)

Designed for standard width stile applications on wood and metal doors Concealed single point guarded latching for additional security Single door applications Door Types: Wood or metal 1-3/4(44mm) Thick Door 4-1/2 (114mm) minimum stile Strike: C908 Standard Black Nylon Coated - ANSI Prep A115.1 Dogging Feature: Hex key dogging standard; Cylinder dogging available (16-) Mounting Fasteners: Supplied standard with wood and machine screws Latch Bolt: Brass Nickel Plated, 3/4 (19mm) throw, anti-friction Dead Latch: Brass, sliding type Device Centerline from Finished Floor: 41 (1041 mm) for standard applications Center Case Dimensions: 8-3/8 (213mm) x 2-5/8 (67mm) Projection: Pushbar Neutral 3 (76 mm); Pushbar Depressed 2-1/8 (54 mm) Finishes: Dark Oxidized Satin Bronze, Oil Rubbed (BHMA 613) and Satin Stainless Steel (BHMA 630)

Designed for standard width stile applications on wood and metal doors Concealed single point guarded latching for additional security Single door applications Door Types: Wood or metal 1-3/4(44mm) Thick Door 4-1/2 (114mm) minimum stile Strike: C908 Standard Black Nylon Coated - ANSI Prep A115.1 Dogging Feature: Hex key dogging standard; Cylinder dogging available (16-) Mounting Fasteners: Supplied standard with wood and machine screws Latch Bolt: Brass Nickel Plated, 3/4 (19mm) throw, anti-friction Dead Latch: Brass, sliding type Device Centerline from Finished Floor: 41 (1041 mm) for standard applications Center Case Dimensions: 8-3/8 (213mm) x 2-5/8 (67mm) Projection: Pushbar Neutral 3 (76 mm); Pushbar Depressed 2-1/8 (54 mm) Finishes: Dark Oxidized Satin Bronze, Oil Rubbed (BHMA 613) and Satin Stainless Steel (BHMA 630)

Sargent Exit Device - Lock/Door Handle # 98TPTB 26D 06EE337 6-02030 1-3/4 Door 800 Series Outside Trim Condition: Appears to be NEW Feel Free To Message Us With Any Questions!! Our Reference# S20110601-104 Thanks For Looking! WWW . BMGSURPLUS Auction Information Auction Sales Policy: Your bid is a contract - Place a bid only if you're serious about buying the item. If you are the winning bidder, you will enter into a legally biding contract to purchase the item. If the seller is unable to esta

Designed for standard width stile applications on wood and metal doors Non-Handed Single point rim latching device Single door & double door applications with mullions Quiet operation and solid security Door Types: Wood or metal 1-3/4(44mm) Thick Door Strike: 649 Standard Black Nylon Coated Dogging Feature: Hex key dogging standard Electric Options: 55-Request-to-exit Signal-Rail monitoring and 56-ELR remote latch retraction Mounting Fasteners: Supplied standard with wood and machine screws Latch Bolt: Stainless steel, 3/4 (19mm) throw Device Centerline from Finished Floor: 41 (1041 mm) Center Case Dimensions: 8-3/8 (213mm) x 2-5/8 (67mm) Projection: Pushbar Neutral 3 (76 mm); Pushbar Depressed 2-1/8 (54 mm) Finish: Satin Stainless Steel (BHMA 630) Electric Option Features - 56 - Latch Retraction: Electric Latch Retraction (ELR) exit device is the perfect choice for high traffic egress doors that require access control. This non-handed exit device rail is durable and easy to install. Once retracted, the door functions in a push/pull manner and delivers quiet, smooth operation. Motor-driven latch retraction Continuous or intermittent use Adjustable timer (0-10 seconds) no costly external timer required Diagnostic LED to improve field service .6A during retraction and .25A maintained in dogged hold position 24 VDC regulated/filtered power supply required - 55 - Request-to-Exit Signal Switch Exit Devices provides push rail monitoring for a variety of applications; such as to sound an alarm, initialize a delayed egress system, or de-energize an electromagnetic lock. Switch type SPDT form C contacts 30 VDC@2 Amp. maximum rating All wires run through rail

Designed for standard width stile applications on wood and metal doors Non-Handed Single point rim latching device Single door & double door applications with mullions Quiet operation and solid security Door Types: Wood or metal 1-3/4(44mm) Thick Door Strike: 649 Standard Black Nylon Coated Dogging Feature: Hex key dogging standard Electric Options: 55-Request-to-exit Signal-Rail monitoring and 56-ELR remote latch retraction Mounting Fasteners: Supplied standard with wood and machine screws Latch Bolt: Stainless steel, 3/4 (19mm) throw Device Centerline from Finished Floor: 41 (1041 mm) Center Case Dimensions: 8-3/8 (213mm) x 2-5/8 (67mm) Projection: Pushbar Neutral 3 (76 mm); Pushbar Depressed 2-1/8 (54 mm) Finish: Satin Stainless Steel (BHMA 630) Electric Option Features - 56 - Latch Retraction: Electric Latch Retraction (ELR) exit device is the perfect choice for high traffic egress doors that require access control. This non-handed exit device rail is durable and easy to install. Once retracted, the door functions in a push/pull manner and delivers quiet, smooth operation. Motor-driven latch retraction Continuous or intermittent use Adjustable timer (0-10 seconds) no costly external timer required Diagnostic LED to improve field service .6A during retraction and .25A maintained in dogged hold position 24 VDC regulated/filtered power supply required - 55 - Request-to-Exit Signal Switch Exit Devices provides push rail monitoring for a variety of applications; such as to sound an alarm, initialize a delayed egress system, or de-energize an electromagnetic lock. Switch type SPDT form C contacts 30 VDC@2 Amp. maximum rating All wires run through rail

Designed for standard width stile applications on wood and metal doors Non-Handed Single point rim latching device Single door & double door applications with mullions Quiet operation and solid security Door Types: Wood or metal 1-3/4(44mm) Thick Door Strike: 649 Standard Black Nylon Coated Dogging Feature: Hex key dogging standard Electric Options: 55-Request-to-exit Signal-Rail monitoring and 56-ELR remote latch retraction Mounting Fasteners: Supplied standard with wood and machine screws Latch Bolt: Stainless steel, 3/4 (19mm) throw Device Centerline from Finished Floor: 41 (1041 mm) Center Case Dimensions: 8-3/8 (213mm) x 2-5/8 (67mm) Projection: Pushbar Neutral 3 (76 mm); Pushbar Depressed 2-1/8 (54 mm) Finish: Satin Stainless Steel (BHMA 630) Electric Option Features - 56 - Latch Retraction: Electric Latch Retraction (ELR) exit device is the perfect choice for high traffic egress doors that require access control. This non-handed exit device rail is durable and easy to install. Once retracted, the door functions in a push/pull manner and delivers quiet, smooth operation. Motor-driven latch retraction Continuous or intermittent use Adjustable timer (0-10 seconds) no costly external timer required Diagnostic LED to improve field service .6A during retraction and .25A maintained in dogged hold position 24 VDC regulated/filtered power supply required - 55 - Request-to-Exit Signal Switch Exit Devices provides push rail monitoring for a variety of applications; such as to sound an alarm, initialize a delayed egress system, or de-energize an electromagnetic lock. Switch type SPDT form C contacts 30 VDC@2 Amp. maximum rating All wires run through rail

Designed for standard width stile applications on wood and metal doors Non-Handed Single point rim latching device Single door & double door applications with mullions Quiet operation and solid security Door Types: Wood or metal 1-3/4(44mm) Thick Door Strike: 649 Standard Black Nylon Coated Dogging Feature: Hex key dogging standard Electric Options: 55-Request-to-exit Signal-Rail monitoring and 56-ELR remote latch retraction Mounting Fasteners: Supplied standard with wood and machine screws Latch Bolt: Stainless steel, 3/4 (19mm) throw Device Centerline from Finished Floor: 41 (1041 mm) Center Case Dimensions: 8-3/8 (213mm) x 2-5/8 (67mm) Projection: Pushbar Neutral 3 (76 mm); Pushbar Depressed 2-1/8 (54 mm) Finish: Satin Stainless Steel (BHMA 630) Electric Option Features - 56 - Latch Retraction: Electric Latch Retraction (ELR) exit device is the perfect choice for high traffic egress doors that require access control. This non-handed exit device rail is durable and easy to install. Once retracted, the door functions in a push/pull manner and delivers quiet, smooth operation. Motor-driven latch retraction Continuous or intermittent use Adjustable timer (0-10 seconds) no costly external timer required Diagnostic LED to improve field service .6A during retraction and .25A maintained in dogged hold position 24 VDC regulated/filtered power supply required - 55 - Request-to-Exit Signal Switch Exit Devices provides push rail monitoring for a variety of applications; such as to sound an alarm, initialize a delayed egress system, or de-energize an electromagnetic lock. Switch type SPDT form C contacts 30 VDC@2 Amp. maximum rating All wires run through rail

New Sargent 8700 Series Exit Device - Parts This sale is for the following parts: G Rail G rails are for doors 43 to 48 inches wide. No cutting is required for 48 door. 32D Finish - Satin Stainless Steel This sale is for one (1) rail. No other parts are included in this sale. Domestic 48 States Shipping:Shipped UPS Ground. We reserve the right to refund and cancel prepaid orders with incorrect shipping payments. All parts shipped to the registered EBay address only. (Preapproved manufacturer

Arm-A-Dor secure panic hardware offers 24-hour protection, keeping intruders out while providing life-saving security within. Developed for retail back door security by retail retail industry construction experts, Arm-A-Dor has many commercial, industrial and institutional application. Surface mounted for ease of installation and suitability for a wide range of applications Select a model that automatically locks whenever the door is closed, or one that must be manually locked, whichever suits your particular application. Offers locking bar protection for security from the outside, single motion egress, and life safety compliance. Design as a security system for service and emergency exits, the Arm-A-Dor device is for exit-only doors and cannot be configured to unlock from the outside. All models are US28 finish, exit-only, and can be mounted either left-hand or right-hand. Three Products in One Locking bar security Panic exit device with UL listing U.S. and Canada Loss prevention alarm (when alarm equipped) Drop Bar Security Provides resistance to forced entry attacks per UL1034 standard Locking members extend 1-1/2 over frame on each side Flexible Installation Quick install models with pre-assembled 36 and 48 units Easy to follow six-step installation instructions Retrofit or new construction work Non-handed Fits doors 36 to 48 wide Double-door applications work on fixed or removable center mullions or without mullion No special door preparation Works on any door or frame Fits jambs from 6-3/4 Shipped with required hardware for standard door applications Works with ANY Security System Alarm operated by standard or interchangeable core mortise cylinder Optional remote switch operates timed delay egress systems, cameras or other alarms