The AXIS 292 Network Video Decoder decodes digital video and audio streams into analog video signals. This allows analog devices such as monitors and video switches to be connected to an Axis IP-based video system. AXIS 292 can be configured to keep track of multiple events continuously, as well as to switch between video sources at given time intervals. With auto-connect on alarm for example when motion is detected, video can be displayed instantly, allowing the operator to take appropriate action. Large areas can be monitored anywhere the network goes, by switching between up to 128 different video sources. Sensitive video streams can be encrypted using HTTPS. The AXIS 292 Network Video Decoder is ideal when there is a need to display live video on an analog monitor, for example when showing the entrance of a shopping mall or when using live video for promotion in a store. AXIS 292 can also be used for easily and cost-effectively connecting existing analog video surveillance systems at different locations. Video from analog cameras can be transferred via Axis video servers over an IP network, bridging long or shorter distances, and be converted back to analog video by AXIS 292 decoders at any location on the network. See System overview for details. The AXIS 292 now supports Discovery in the AXIS Camera Management installation and management tool. FEATURES: Video input: Any Axis network camera or video server Video output: Analog PAL or NTSC, Resolution > 500 TVL (depending on source resolution) Adjustable margins for various monitor types Video decoding: Motion JPEG and MPEG-4 (auto detection), Unicast and multicast connection Frame rates up to 30/25 (NTSC/PAL), Bit rates up to 8 Mbit/s Audio decoding: Stereo and mono, G.711, G.721, G723 and MPEG-1 Layer-2 Video sequencing: Up to 128 Axis video sources may be preconfigured, Manual cycling (video select button), Automatic cycling (configurable time interval), Auto-connection on alarm from video source Security: Password protected user access, HTTPS encryption Connectors: Analog video output: Composite video BNC or RCA, 1 Vpp, 75Ohm; or S-Video 4-pol Mini-DIN (Y/C), 1 Vpp, 75Ohm; Ethernet 10BaseT/100BaseTX, RJ-45, 3.5 mm jack for Line out, stereo, to active speaker Casing: Metal casing. Standalone, stackable or with brackets for wall- or cage mount Processors and memory: CPU: AMD SC1200, Decoder: Sigma designs, 32 MB RAM, 32 MB Flash Power: 7-20 V DC, min 7 W Operating conditions: 5 - 50 ºC (41 – 122 ºF), Humidity: 20 - 80% RH (non condensing) Installation, management and maintenance: AXIS Camera Management tool on CD and web-based configuration, Internet Explorer 5.x or later, For other operating systems and browsers, see www.axis.com/techsup, Firmware upgrades over HTTP or FTP, firmware available at www.axis.com System integration: AXIS VAPIX API Supported protocols: IPv4, HTTP, HTTPS, SSL/TLS*, TCP, ICMP, RTSP, RTP, UDP, IGMP, RTCP, SMTP, FTP, DHCP, Bonjour**, ARP, DNS Included accessories: Installation Guide, CD with User’s Manual, software, installation and managent tools, mounting kit, power supply 9V DC Dimensions (HxWxD) and weight: 42 x 140 x 228 mm (1.7" x 5.5" x 8.9"); 732 g (1.6 lbs) excl. power supply PDF Spec Sheet

W-VB213-B&C 1ch passive PV balun 1ch, power(DC12V)-video-audio transmitter and receiver Specification: -Full motion CCTV video at long distance(Max. 1000ft). -Built-in Linearity, sharpness and chroma control -Enable unparalleled common interferences rejection -Built-in transient protection -Improve the picture definition when connect to DVR or Quad, and reduce noise affects.

Grandstream IP video encoder with 4 channelsExcellent solution for IP enabling of traditional analog cameras for professional surveillance environmentsH.264 real time video compression (D1 resolution) with sharp image clarity at low-to-modest bandwidthIndustry leading SIP/VoIP for 2-way audio and video streaming to mobile phones and video phonesEmbedded analytics and large pre-/post-event recording bufferManaged with Gsurf, Grandstream's intuitive video management software that controls up to 36 cameras simultaneouslyAdvanced multi-streaming-rate real-time H.264, motion JPEG at D1 resolutionAudio input and output, RS485/232, PTZ control24MB pre-/post-event recording buffer per portUSB 2.0 port SD slot for storage/wireless network cardIntegrated Power-over-Ethernet (802.3af)Embedded video analytics including motion (up to 16 target areas) and video loss detectionSIP/VoIP support for two-way audio communications and video streaming to mobile phones and video phonesBuilt-in high performance streaming server to allow up to 12 simultaneous D1 viewers or 25 CIF viewersCombine with GSurf software to support remote viewing, controlling and recording of up to 36 cameras from anywhere on the internet or corporate network (GSurf free download)H.264 BP atlevel 3.0, JPEG, motion JPEGVideo resolution Full D1: 720 x 576 (PAL), 720 x 480 (NTSC)Max frame rate in max video resolution: 75fps/62.5fps (NTSC/PAL): 4ports at CIF at full rate, or 2 ports at D1 & 2 ports at CIF at full rate, or 4 ports at D1 at reduced rate32 Kbps 2Mbps video bit rate4 Video inputs (BNC, voltage 1.0Vp-p, resistance 75O)3.55mm Line-in3.5mm line-outG.711, G.726 audio compression4 alarm inputs4 alarm outputs (125VAC/.5A, 30vac/2A)PTX controlRS485/RS232 Serial portMotion detection (up to 16 target ares), video loss (pending)24MB pre-post alarm buffer (per channel)Snapshots: trigger upon events, send via /FTPMulti-streaming-rate for preview and recordingVideo watermark