Master Bearing/Synchro O/H Kit Getrag G360 Transmission. '89-'93 Dodge D250/D350

Fits: Dodge Getrag Transmission (89-93) Dodge nv4500/5600 Transmissions (94-05) Dodge G56 Transmissions (05.5 - 07) Trans-Cool patent pending fin cooling system is uniquely designed to transmit heat from the inner fins to the outer fins thus dissipating heat from your transmission and keeping your vehicle performing at it's best. Benefits of the Trans-Cool Transmission Cooler: Holds and additional quart of transmission fluid patent pending aluminum casting 356T6 alloy fins allow for ultimate cooling ability bolts securely to any 5-speed truck transmission or larger temperature gauge port with removable plug Installation Instructions: Remove your PTO plates on both sides of your transmission and install TRANS-COOL Aluminum casting 356T6 alloy units. Drain Transmissin Fluid Remove 6 Bolts from each PTO plate Remove PTO plates and gaskets. Clean surface thoroughly Install new gaskets included in the TRANS-COOL kit Install new TRANS-COOL system using inclosed bolts Torque bolts securely ( Do not over torque) Refill transmission Fluid ( add one additional quart) NOTE: Does not fit '07.5-'08 6.7L trucks due to interference from the exhaust system. WILL However work on trucks that have off-road exhaust installed.

The MINI Cooper Service Manual: 2002-2006 is a comprehensive source of service information and specifications for MINI Cooper models from 2002 to 2006. This manual supersedes our previous 2002-2004 manual with two more model years of coverage, including new repair information for the convertible and the 2005 facelift. Whether you're a professional or a do-it-yourself MINI owner, this manual will help you understand, care for and repair your car. Models & engines covered: Cooper: 1.6 liter normally aspirated engine Cooper S: 1.6 liter supercharged engine Transmissions covered: Cooper: Manual 5-speed transmission (Midlands, Getrag) Automatic continuously variable transmission (CVT) Cooper S: Manual 6-speed transmission (Getrag) Automatic with Agitronic (Aisin) Features: Procedures for everything from basic oil change service to interpreting the malfunction indicator light (MIL). This manual tells you what to do and how and when to do it. Engine and cylinder head service, including camshaft timing chain setup and adjustment. Information for specific driveability problems, including explanation of the engine management system and OBD II diagnostic trouble codes (DTCs). Theory of operation and repair information for the EMS2000 engine management system. Supercharger and intercooler information, including component removal and replacement (Cooper S). Drivetrain maintenance, including troubleshooting, adjustment and repair of clutch, gearshift linkage and drive axles. Manual and automatic transmission removal, installation, seal replacement and external service. System description and repair information for Antilock Brakes (ABS), Automatic Stability Control (ASC) and Dynamic Stability Control (DSC). Heating and air conditioning repair (IHKS / IHKA), including component replacement. Body adjustments and repairs, including sunroof and convertible. Wiring schematics and extensive electrical component section specifying relay, control module and ground locations with detailed illustrations and photos. Bentley repair manuals provide the highest level of clarity and comprehensiveness for service and repair procedures. If you're looking for better understanding of your 2002 through 2006 MINI Cooper, look no further than Bentley.

Applications: 1988-2004 5.9L Dodge Cummins. Transmission: NV4500 or Getrag (5 speed). Single Disc plus Flywheel for 400 hp, 800 ft. lbs. torque. This Dyna Max kit features a performance organic lining on a carcelled fin. The pressure plate is modified for higher plate load and smoothness of engagement. This clutch was designed to cure premature disk failure due to high horse power and heavy hauling in the 5 speed and early 6 speed non-ETH 12 ¼” clutches. South Bend has taken the 13” ETH Clutch and modified it to accept the 1 ¼” input shaft.

BMW 5 Series (E28): 1982-1988 - Repair InformationThe BMW 5 Series (E28) Service Manual: 1982-1988 is a comprehensive, single source of service information and specifications for BMW 5 Series (E28) cars from 1982-1988. Whether you're a professional technician or a do-it-yourself BMW owner, this manual will help you understand, maintain, and repair systems on 5 Series cars.BMW E28 Models and engines covered in this BMW repair manual:528e(B27, 2.7 liter)533i(B32, 3.2 liter)535i(B34, 3.5 liter)535is(B34, 3.5 liter)BMW E28 Transmissions covered in this BMW repair manual:Getrag 260(with integral bellhousing)Getrag 265(with removable bellhousing)New durable hardcover format - This manual is now being published as a durable, long-lasting hardcover book designed to withstand frequent use in a professional shop or home garage. All of the content of the previous softcover edition is included.Technical features:Complete preventive maintenance procedures from the yearly brake fluid change to resetting the oil service indicator and oxygen sensor lights. This manual tells you what to do, how and when to do it and why it's important. Many of the maintenance recommendations exceed factory-recommended service intervals and are designed to extend your BMW's service life.Detailed troubleshooting and repair information for these Bosch fuel injection and engine management systems: Motronic (528e, 533i, 535i, 535is) and Motronic 1.1 (528e from March 1987). This Motronic 1.1 service information is not covered in BMW's factory repair manual.Comprehensive Engine Management information for specific BMW 5-Series driveability problems, including troubleshooting electronically-controlled idle speed faults that are frequently misdiagnosed.Troubleshooting tips with fast, proven repair procedures used by BMW technicians and specialists.Critical updates and hard-to-find information from dealer service bulletins, such as how to replace the camshaft timing belt, sprocket and tensioner with the correct Z-127 update, and cylinder head bolt replacement on 528e models.Large, easy-to-read wiring schematics for major circuits, along with a full listing of ground points, connector and splice locations, and electronic component locations.Procedures and specifications for rebuilding engines and manual transmissions.

89-93 Dodge Getrag 5 Speed Equipped D250 & D350 trucks. Comes with stock needle roller pilot bearing flywheels must be reground. 350HP 750ft lbs of torque This Dyna Max kit features an organic friction material comprised of 808 composite resulting in a significantly reduced operating temperature which gives this kit ultra-smooth engagement & extended life. This kit will hold up to 350 horsepower & 700 ft. lbs. of torque. Years 1988-2004 5 speed & 6 speed non-ETH. 89-93 Dodge Getrag 5 Speed Equipped 2500 & 3500 trucks.

318i, 325, 325e, 325es, 325i, 325is, 325i Convertible The BMW 3 Series (E30) Service Manual: 1984-1990 is a comprehensive, single source of service information and specifications for BMW 3 Series (E30) cars from 1984-1990. Whether you're a professional technician or a do-it-yourself BMW owner, this manual will help you understand, maintain, and repair systems on 3 Series cars. BMW E30 models and engines covered in this BMW repair manual: * 318i (M10, 1.8 liter engine) * 325/e/es (M20, 2.7 liter engine) * 325/i/is/Convertible (M20, 2.5 liter engine) BMW E30 transmissions covered in this BMW repair manual: * Getrag 240 (4-cylinder cars) * Getrag 260 (6-cylinder cars) Note: For model years 1991, 1992 and 1993 E30 6-cylinder BMWs, this manual is applicable. For model years 1991, 1992 and 1993 E30 4-cylinder BMWs, the engine and engine-related systems are not covered in this manual but the chassis/body systems are covered. Technical highlights: * Fundamental automotive concepts, including explanations of basic troubleshooting, safe and effective workshop practices, and tools. * Complete preventive maintenance procedures from resetting the oil and service indicator light to the yearly brake fluid change. This manual tells you what maintenance to do, how and when to do it, and why it's important. Many of the maintenance recommendations actually exceed factory-recommended service and are designed to extend your BMW's service life. * Comprehensive Engine Management information explains specific BMW 3-Series driveability problems, with detailed troubleshooting and repair information for these Bosch Fuel Injection and Engine Management Systems: L-Jetronic (318i), Motronic (325, 325e, 325es), and Motronic 1.1 (325i, 325is, 325i Convertible). * Troubleshooting tips with fast, proven repair procedures used by BMW technicians and specialists. * Hard to find service information from dealer service bulletins, such as how to replace the camshaft timing belt, sprocket and tensioner with the correct Z-127 update, and cylinder head bolt replacement on early 3 Series cars. * Large, easy-to-read wiring schematics for major circuits. * Procedures and specifications for rebuilding engines and manual transmissions.

The BMW Repair Manual: 3 Series (E30): 1984-1990 is a comprehensive, single source of service information and specifications for BMW 3 Series (E30) cars from 1984-1990. Whether you're a professional technician or a do-it-yourself BMW owner, this manual will help you understand, maintain, and repair systems on 3 Series cars.BMW E30 models and engines covered in this BMW repair manual:318i(M10, 1.8 liter engine)325/e/es(M20, 2.7 liter engine)325/i/is/Convertible(M20, 2.5 liter engine)BMW E30 transmissions covered in this BMW repair manual:Getrag 240(4-cylinder cars)Getrag 260(6-cylinder cars)New durable hardcover format - This manual is now being published as a durable, long-lasting hardcover book designed to withstand frequent use in a professional shop or home garage. All of the content of the previous softcover edition is included.Technical features:Fundamental automotive concepts, including explanations of basic troubleshooting, safe and effective workshop practices, and tools.Complete preventive maintenance procedures from resetting the oil and service indicator light to the yearly brake fluid change. This manual tells you what maintenance to do, how and when to do it, and why it's important. Many of the maintenance recommendations actually exceed factory-recommended service and are designed to extend your BMW's service life.Comprehensive Engine Management information explains specific BMW 3-Series driveability problems, with detailed troubleshooting and repair information for these Bosch Fuel Injection and Engine Management Systems: L-Jetronic (318i), Motronic (325, 325e, 325es), and Motronic 1.1 (325i, 325is, 325i Convertible). Troubleshooting tips with fast, proven repair procedures used by BMW technicians and specialists.Hard to find service information from dealer service bulletins, such as how to replace the camshaft timing belt, sprocket and tensioner with the correct Z-127 update, and cylinder head bolt replacement on early 3 Series cars.Large, easy-to-read wiring schematics for major circuits.Procedures and specifications for rebuilding engines and manual transmissions.

BMW Repair Manual: 5 Series (E28): 1982–1988 This Bentley Manual is a comprehensive, single source of service information and specifications for BMW 5-Series (E28) cars from 1982-1988. Whether you're a professional technician or a do-it-yourself BMW owner, this manual will help you understand, maintain, and repair systems on 5-Series cars. BMW E28 Models and engines covered in this BMW repair manual: * 528e(B27, 2.7 liter)* 533i(B32, 3.2 liter)* 535i(B34, 3.5 liter)* 535is(B34, 3.5 liter) BMW E28 Transmissions covered in this BMW repair manual: * Getrag 260(with integral bellhousing)* Getrag 265(with removable bellhousing) Technical highlights: * Complete preventive maintenance procedures from the yearly brake fluid change to resetting the oil service indicator and oxygen sensor lights. This manual tells you what to do, how and when to do it and why it's important. Many of the maintenance recommendations exceed factory-recommended service intervals and are designed to extend your BMW's service life.* Detailed troubleshooting and repair information for these Bosch fuel injection and engine management systems: Motronic (528e, 533i, 535i, 535is) and Motronic 1.1 (528e from March 1987). This Motronic 1.1 service information is not covered in BMW's factory repair manual.* Comprehensive Engine Management information for specific BMW 5-Series driveability problems, including troubleshooting electronically-controlled idle speed faults that are frequently misdiagnosed.* Troubleshooting tips with fast, proven repair procedures used by BMW technicians and specialists.* Critical updates and hard-to-find information from dealer service bulletins, such as how to replace the camshaft timing belt, sprocket and tensioner with the correct Z-127 update, and cylinder head bolt replacement on 528e models.* Large, easy-to-read wiring schematics for major circuits, along with a full listing of ground points, connector and splice locations, and electronic component locations.* Procedures and specifications for rebuilding engines and manual transmissions.

13125-OFEK - Single Disc for 450 hp 900 ft. lbs. torque - Includes Flywheel This Dyna Max kit features a variation from organic to organic and feramic or all feramic linings with marcelled fins. The pressure plate is modified for higher plate load and smoothness of engagement. This clutch was designed to cure premature disk failure due to high horse power and heavy hauling in the 5 speed and early 6 speed non-ETH 12 1/4" clutches. We have taken the 13" ETH clutch and modified it to accept the 1 1/4" input shaft. By doing this it enabled us to offer a disk center that is 2-3 times larger and stronger than can be provided in the 12 1/4" clutch kits. This kit comes with a flywheel re-drilled and refaced to accept the larger clutch and is rated to handle up to 475 horsepower & 1000 ft. lbs. of torque. Years 1988-2004 5 speed & 6 speed non-ETH. Includes flywheel pressure plate flywheel & throwout bearing.

13125-FEK - Single Disc for 550 hp 1100 ft. lbs. torque - Includes Flywheel This Dyna Max kit features a variation from organic to organic and feramic or all feramic linings with marcelled fins. The pressure plate is modified for higher plate load and smoothness of engagement. This clutch was designed to cure premature disk failure due to high horse power and heavy hauling in the 5 speed and early 6 speed non-ETH 12 1/4" clutches. We have taken the 13" ETH clutch and modified it to accept the 1 1/4" input shaft. By doing this it enabled us to offer a disk center that is 2-3 times larger and stronger than can be provided in the 12 1/4" clutch kits. This kit comes with a flywheel re-drilled and refaced to accept the larger clutch and is rated to handle up to 475 horsepower & 1000 ft. lbs. of torque. Years 89-93 Getrag 5 Speed. Includes flywheel pressure plate flywheel & throwout bearing.

13125-OK - Single Disc for 400 hp 800 ft. lbs. torque - Includes Flywheel This Dyna Max kit features an organic lining on a marcelled fin. The pressure plate is modified for higher plate load and smoothness of engagement. This clutch was designed to cure premature disk failure due to high horse power and heavy hauling in the 5 speed and early 6 speed non-ETH 12 1/4" clutches. We have taken the 13" ETH clutch and modified it to accept the 1 1/4" input shaft. By doing this it enabled us to offer a disk center that is 2-3 times larger and stronger then can be provided in the 12 1/4" clutch kits. This kit comes with a flywheel re-drilled and refaced to accept the larger clutch and is rated to handle up to 400 horsepower & 800 ft. lbs. of torque. Years 89-93 Getrag 5 speed. Includes flywheel pressure plate flywheel & throwout bearing.