mySimon is not affiliated with or endorsed by Simon Property Group. If you are looking for Simon Property Group, click here.

ie8 fix

Showing results 1 - 25 of 34 for "jbl" in Music

JBL 2242H 18 Low Frequency Transducer 8 ohm
JBL 2242H 18 Low Frequency Transducer 8 ohm
The 2242H is ideal for use in high output subwoofer systems with bass extension to 25Hz. The total peak-to-peak excursion of the 2242H is 18 mm, within 10% linearity. The 2242H is built around a completely new motor structure with a pole piece extending both above and below the top plate to improve gap flux symmetry and increase thermal conductivity from the voice coil to the pole piece. In addition to the benefits of JBL's Symmetrical Field GeometryTM, the 2242H also incorporates a copper shorting ring that is imbedded in the pole piece at the precise center of the gap and is in close proximity to the voice coil. The copper ring acts like a shorted secondary turn in a transformer, with the voice coil acting as the primary winding. The benefits of this are a reduction in third harmonic distortion and a reduction of the voice coil's inductance, which improves the transducer's transient response. The 2242H can produce peak instantaneous outputs of 134 dB above 100 Hz measured at one meter, greater than any other JBL low frequency transducer. The new voice coil-magnet circuitry is referred to as Super Vented GapTM technology. The 2242H carries a power rating of 800 watts, as compared with the 600 watt rating of its predecessors. This is accomplished through the use of a voice coil with one-third more surface area than in the earlier designs, allowing the 2242H to dissipate heat more effectively to the surrounding metal parts, The higher power rating, reduced power compression, and increased efficiency give the 2242H a net continuous output capability that is 3 dB greater than that of the 2241H.
$737 Go to
Amazon Marketplace
JBL VRX918S-BLACK Subwoofer, 18, 800W Continuous, Line Array, Black
JBL VRX918S-BLACK Subwoofer, 18, 800W Continuous, Line Array, Black
The VRX918S is a compact, high power suspendable subwoofer system containing a 2268H neodymium magnet, patented Differential Drive®, 18 woofer in a front-loaded, vented enclosure. The VRX918S was designed specifically for use in arrays with the VRX932LA Line Array speaker and VRX-AF Array Frame. In addition it may also be used in arrays consisting entirely of VRX918S subwoofers.The system offers complete input connection flexibility for compatibility with a variety of cabling schemes. A recessed, external switch allows selection of either contacts +1/-1 or +2/-2.Equally at home in ground stacked applications, the VRX918S is equipped with a top-mounted, threaded, 20 mm socket that can receive the optional SS4-BK pole. This adjustable height pole can be used to mount speakers equipped with standard 35 mm pole sockets and weighing up to 100 lb. The threaded socket minimizes buzzing and rattling and assures that the pole will be secure and straight.The enclosure is constructed of top quality birch plywood, coated in JBL's rugged DuraFlexTM finish and is heavily braced to maximize lowfrequency performance. The attractive CNC-machined, 16-gauge steel grille is internally lined with acoustically transparent foam to provide additional driver protection and give a very professional appearance. The rear of the enclosure is fitted with T-nuts which may be used to attach the optional WK-4 caster kit.
$1249 Go to
Amazon Marketplace
JBL Deluxe Padded Cover for EON518S Speaker - Black (EON18-CVR-DLX)
JBL Deluxe Padded Cover for EON518S Speaker - Black (EON18-CVR-DLX)
Deluxe Padded Cover for EON18. 600D Nylon w/ 10mm Foam Padding , Handle Access Covers, & A Polyethylene Sheet Reinforcement to Protect The Speaker Grille. Embroidered JBL Logo.
$90 Go to
Amazon Marketplace